Televes 7254

These instructions are to help you with your box, and have been hurriedly put together from earlier documents in view of some major changes on Christian TV Channels
We cannot guarantee they are correct and take no responsibility for any loss or problem. Do not use these instructions if you are unsure. We offer a retune service for those who are not technically minded.

PLEASE NOTE THAT THIS IS A GUIDE SHEET ONLY. DO NOT AT ANY TIME PRESS THE FACTORY DEFAULT SETTING AS THIS WILL NOT RECTIFY ANY MISTAKES MADE BUT WIPE OUT ALL OF YOUR CHANNELS AND IS CHARGEABLE TO PUT RIGHT ( £29-95).

Adding, Deleting and Moving Channels.

 

Adding channels:

  1. On your 7254 remote press Menu.
  2. Arrow down to INSTALLATION and press OK.
  3. Press 2 or (arrow down to SCAN TRANSPONDER and press OK)
  4. Check the following:
    Satellite: Astra 2
  5. Arrow down to FREQUENCY then arrow left 5 times to remove any exsisting frequency and then enter your 5 digit new frequency.
  6. Arrow down and Check the SYMBOL RATE. (Usually 27500 but occasionally 22000.)
  7. Arrow down to POLARITY and set to Horizontal or Vertical using left/ right arrows
  8. Arrow down to FEC Code rate and then arrow left to the required FEC.
  9. Arrow down to SCAN MODE and arrow left to FREE CHANNEL.
  10. Press OK on your remote and your receiver will start searching.
  11. When finished your receiver will ask if you wish to save channels so press OK on your control.
  12. You can then EXIT out on your controller.

 

 

Deleting channels:

  1. Press MENU on your remote.
  2. Arrow down to INSTALLATION press OK (and enter password if required)
  3. Press 4 (or arrow down to EDIT CHANNELS and press OK)
  4. Check that the delete options is ticked (red tick beside it)
  5. Delete all unwanted channels by arrowing up/down to them amd pressing OK. (These will have a dark blue cross beside them.)
  6. When all have been selected press EXIT on your controller and it will ask if you wish to save changed so press OK on yes.

IF YOU WISH TO MOVE CHANNELS DO NOT EXIT OUT, otherwise EXIT

 

 

Moving Channels:

Please note that unless you wish to move channels at same time as deleting follow parts 1-3 on the deleting channels section then do the following

  1. Arrow across left and select MOVE option by pressing OK when it is highlighted in white.
  2. Arrow right and select the channel (OK) you wish to MOVE. Place it in the position you want and then press OK. When dropping the channel you will get a ( please wait) sign.
  3. Press EXIT and your receiver will ask do you wish to save changed press OK on yes.