Televes 7235

These instructions are to help you with your box, and have been hurriedly put together from earlier documents in view of some major changes on Christian TV Channels
We cannot guarantee they are correct and take no responsibility for any loss or problem. Do not use these instructions if you are unsure. We offer a retune service for those who are not technically minded.

THIS IS A GUIDE SHEET TO HELP YOU. DO NOT AT ANY TIME PRESS THE FACTORY DEFAULT AS THIS WILL NOT RECTIFY ANY MISTAKES MADE BY YOU BUT WIPE OUT YOUR UNIT AND IS CHARGEABLE TO PUT RIGHT (£29-95 RE-TUNE).

Loading, deleting and moving channels.

To Load Channels:

  1. Press Menu on your 7235 controller.
  2. Arrow down/up to highlight TP SETUP and press OK.
  3. Arrow across to ANTENNA number 9 (this should display ASTRA 28 in the greyish bar on the bottom left).
  4. Arrow down to TRANSPONDER and arrow left to NEW.
  5. Arrow down to FREQUENCY and enter your frequency.
  6. Arrow down to SYMBOL RATE and enter this. (Please note that most channels are 27500 or BBCs are 22000).
  7. Arrow down to POLARIZATION and arrow left or right to select VER or HOR depending on which you require.
  8. Arrow down to FEC and then arrow right till you find the one you require.
  9. Arrow down to START and then press OK on your controller.
    Your receiver will start searching. When it has completed its search it will display Searching complete etc.
  10. Press OK on your remote and this will save channels.

 

To Delete Channels: (if you’ve just loaded ignore step 1)

  1. Press Menu on your receiver remote.
  2. Go to TV channel or Radio channel depending on which you require and press OK.
  3. Arrow down to delete and press OK (you will find channel names will turn yellow).
  4. Highlight the channels you do not want and press OK on them, the channel number will highlight yellow. (These will be deleted in part 5).
  5. Press EXIT once and your receiver will ask (are you sure you want to delete marked channels) make sure the OK icon is highlighted and press OK. Your receiver will display (Please wait for saving data.) and go back to TV channel.

 

To Move Channels:

  1. Follow parts 1 and 2 of delete channels.
  2. Arrow down to move and press OK.
  3. Highlight the channel you wish to move ( again the channel number will highlight yellow) and move to your suited place.
  4. To drop the channel in that place press OK.
  5. Press EXIT on your controller and your receiver will display (Please wait for saving data).